| 982752101 Liebherr R944B Slewing Ring | rb max.:1.3 mm; Da min.:55 mm; da max.:44 mm; C:13.5 mm; Calculation factor Y:1.4; Ca min.:3 mm; Cb min.:3.5 mm; r3,4 min.:1.3 mm; Reference speed:8500 r/min; Da max.:56 mm; Mass bearing:0.2 kg; Calculation factor Y0:0.8; T:17 mm; Fatigue load limit Pu:5.4 kN; Dimension series:L 69300; r1,2 min.:3.6 mm; Db min.:60 mm; D:63 mm; B:17 mm; Limiting speed:10000 r/min; |
| 982811501 Liebherr R964 Slewing Ring | Dynamic (Cr):9 mm; with tapered bore:950 min-1; Grease:4090 kN; Pu:2110 kN; Oil:329.070 kN; d:320 mm; D:480 mm; with cylindrical bore:750 min-1; Static (Cor):16.7 mm; B:121 mm; rs (min):4 mm; |
| 933628601 Liebherr LH60 CHR Slewing Ring | da min.:167 mm; Reference speed:3000 r/min; Limiting value e:0.2; da max.:177 mm; Basic dynamic load rating C:229 kN; s max.:5.2 mm; Fatigue load limit Pu:35.5 kN; Calculation factor kr:0.15; db min.:183 mm; Basic static load rating C0:325 kN; Da max.:230 mm; d1 ≈:188 mm; d:160 mm; Limiting speed:4800 r/min; D1 ≈:210.8 mm; D:240 mm; B:38 mm; Mass bearing:6.25 kg; r3,4 min.:1.5 mm; Axial load factor Y:0.6; |
| 933816501 Liebherr R934C Slewing Ring | H2:120 mm; Cap bolt, rec. tightening torque:600 N·m; H:675 mm; Appropriate attachment bolt, size G:36 mm; Mass housing:427 kg; A2:395 mm; Locating ring:2 x FRB 22.5/560; P55°:7500 kN; N:50 mm; N4 max.:25 mm; J6:880 mm; da:354.012 mm; s:24 mm; A1:360 mm; Appropriate attachment bolt, rec. tightening torque:2280 N·m; P180°:3000 kN; Oil level, min.:88 mm; Q180°:2100 kN; H1:340 mm; |
| 983088401 Liebherr A954 Li Slewing Ring | Da:250 mm; h:51.594 mm; Stabilizing ring:SR-28-0; PG:1/4 NPT; PosiTrac Plus contact element:2 x B10724-122; RG:3/4 NPT; H:298.45 mm; H1:152.4 mm; Housing:SSAFS 528; A1:149.225 mm; R2:38.1 mm; ba:61.119 mm; Cap bolt, SAE grade:8; Cap bolt:3/4-10 UNC; Cap bolt recommended tightening torque:515.2 N·m; P60°:301 kN; P180°:127 kN; Labyrinth ring:2 x LOR 120; A2:193.675 mm; Pa:28.5 kN; |
| 982853501 Liebherr R308 Slewing Ring | Grease Speed Rating n1:5300 rpm; Fillet Radius rb:1.00 mm; d:50.000 mm; Fillet Radius ra:2.00 mm; D:130.0000 mm; Basic Static Radial Load Rating Co:78000 N; Basic Dynamic Radial Load Rating C:95600 N; B:31.00 mm; Oil Speed Rating n2:6300 rpm; |
| 969331201 Liebherr R944C TU Slewing Ring | Grease Speed Rating n1:6000 rpm; d:35.000 mm; Accessories:One Seal; D:72.0000 mm; Basic Dynamic Radial Load Rating C:39100 N; Fillet Radius ra:1.00 mm; Sealed Speed Rating n3:6000 rpm; B:30.20 mm; Basic Static Radial Load Rating Co:36500 N; Oil Speed Rating n2:8000 rpm; |
| 982720001 Liebherr R964B Slewing Ring | Accessories:Shield & Seal; Basic Static Radial Load Rating Co:65500 N; Sealed Speed Rating n3:2400 rpm; d:105.000 mm; Fillet Radius ra:2.00 mm; Grease Speed Rating Open/Shielded n1:4000 rpm; D:160.0000 mm; B:26.00 mm; Basic Dynamic Radial Load Rating C:79300 N; Oil Speed Rating Open/Shielded n2:4800 rpm; |
| 982752701 Liebherr R954 Slewing Ring | Ca:85.801 mm; Initial grease fill:379.89 g; N1:22.225 mm; H2:53.975 mm; J min.:336.55 mm; J1:69.85 mm; h:46.831 mm; PosiTrac Plus contact element:2 x B10724-113; P120°:72.5 kN; J max.:368.3 mm; PG:1/4 NPT; P60°:185 kN; A1:120.65 mm; P150°:66.7 kN; Cap bolt, SAE grade:5; A2:187.325 mm; Da:215.001 mm; Cap bolt:2 x 1-8 UNC; S:4.763 mm; End plug (suffix Y):EPR 14; |
| 982706001 Liebherr R912 Li Slewing Ring | d:45.000 mm; Basic Dynamic Radial Load Rating C:59400 N; D:100.0000 mm; Fillet Radius ra:1.50 mm; B:25.00 mm; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Two Shields; Grease Speed Rating Open/Shielded n1:5700 rpm; Basic Static Radial Load Rating Co:46500 N; |